Panasonic KX-TCD455GM, Service Manual

Page: 55 / 133

Note:
After the measuring, sock up the solder of TP.
* :
PC Setting () is required beforehand.
The connection of adjustment equipment are as shown in Adjustment Standard (Base Unit) ().
15.2. Adjustment Standard (Base Unit)
When connecting the Simulator Equipments for checking, please refer to below.
15.2.1. Component View
Note:
(H) - (O) is refered to
ADJUSTMENTS (BASE UNIT AND CHARGER UNIT) ()
15.2.2. Flow Solder Side View
Note:
(A) - (P) is refered to
ADJUSTMENTS (BASE UNIT AND CHARGER UNIT) ()
15.3. Adjustment (Charger Unit)
Items
Adjustment
Point
Procedure Check
(A) Charging Check -
1. Connect Charge Contact 12 /2W register between and charge-.
2. Measure and confirm voltage across the regigster is 2.7V ± 0.2V.
Note:
After the measuring, sock up the solder of TP.
The connection of adjustment equipment are as shown in
Adjustment Standard (Charger Unit) ().
15.4. Adjustment Standard (Charger Unit)
When connecting the Simulator Equipments for checking, please refer to below.
15.4.1. Flow Solder Side View
Note:
(A) is refered to
ADJUSTMENTS (BASE UNIT AND CHARGER UNIT) ()
55