Bluetooth (KX-TCA285/KX-TCA385 only)
You can use Bluetooth to connect to a Bluetooth wireless headset and transfer phonebook data from a
cell phone.
The following Bluetooth headsets can be used with this unit. (Not all operations with the headsets can be
guaranteed.)
– Selected Plantronics
®
-brand headsets
– Selected GN Netcom Jabra
®
-brand headsets
Turning Bluetooth On or Off
Before using Bluetooth to connect to a wireless Bluetooth headset or to a cell phone, Bluetooth must be
set to "On" in the handset settings.
1. Press
or the
[CENTRE]
navigation key.
2. Select "Setting Handset" by pressing the arrow keys, and then press
.
3. Press [ ] or [ ] to select "Bluetooth Option", and then press
.
4. Press [ ] or [ ] to select "On/Off", and then press
.
5. Press [ ] or [ ] to select "On" or "Off", and then press
.
Setting and Changing the Bluetooth PIN Number
Before using Bluetooth to connect to a cell phone, you must set the Bluetooth PIN number in the handset
settings.
1. Press
or the
[CENTRE]
navigation key.
2. Select "Setting Handset" by pressing the arrow keys, and then press
.
3. Press [ ] or [ ] to select "Bluetooth Option", and then press
.
4. Press [ ] or [ ] to select "Cell Phone", and then press
.
5. Press [ ] or [ ] to select "Change BT PIN", and then press
.
6. Enter the old PIN number.
7. Enter a PIN number (4 digits), and then press
.
8. Re-enter the same PIN number as in step 7, and then press
.
*1 If a PIN number has not been set previously, skip this step and continue to step 7.
Note
R
The valid digits are 0–9.
Registering and Deregistering the Bluetooth Headset
You can use a wireless Bluetooth headset with a handset. Before using a Bluetooth headset, you must
register it to a handset.
Registering a Bluetooth Headset
Note
R
Perform any procedures on the headset necessary for registering it before configuring the settings on
the handset. Otherwise, the Bluetooth headset may not be registered.
42
Feature Operations
