Panasonic KX-TC1200NLB, Service Manual

Page: 18 / 72

7.5. Check Handset Transmission
Cross Reference:
Signal Route ()
7.6. Check Handset Reception
Cross Reference:
Signal Route ()
*: Each measurement points are shown in CIRCUIT BOARD (Base Unit) () or CIRCUIT BOARD
(Handset) ()
8. ADJUSTMENTS (BASE UNIT)
If your unit have below symptoms, adjust or confirm each item using remedy column from the
table.
Symptom Remedy*
The base unit dose not respond to a call from handset. Make adjustments in item
The base unit dose not transmit or the transmit frequency is off. Make adjustments in item
The transmit frequency is off. Make confirmation in item
The transmit power output is low, and the operating distance between
the base unit and
the handset is less than normal.
Make confirmation in item
The reception sensitivity of base unit is low with noise. Make confirmation in item
The transmit level is high or low. Make confirmation in item
The reception level is high or low. Make adjustments in item
The unit does not link. Make confirmation in item
*: Refer to Adjustment ().
18