Panasonic KX-TA824 Page 7 Installation Manual Download | Manualshive

Page: 7 / 88

background image

Installation Manual

7

Introduction

About the Installation Manual

This Installation Manual is designed to serve as an overall technical reference for Panasonic
Advanced Hybrid System, KX-TA824. It explains how to install the hardware and program this PBX
using KX-TA Maintenance Console.

The Installation Manual is divided into the following sections:

Section 1 System Outline

Provides general information on the PBX, including the system capacity and specifications.

Section 2 Installation

Provides detailed instructions for installing the PBX, optional service cards, and peripheral
equipment.

Section 3 Guide for KX-TA Maintenance Console

Explains how to install and use KX-TA Maintenance Console, a PC-based programming utility.

Section 4 Troubleshooting

Provides information on troubleshooting and restarting the PBX.

About the Other Manuals

The following manuals are also available:

Feature Manual

The Feature Manual explains what the PBX can do, as well as how to obtain the most of its many
features and facilities.

Programming Manual

The Programming Manual explains how to program the PBX using Panasonic proprietary
telephones (PTs) or the KX-TA Maintenance Console.

Operating Manual

The Operating Manual describes how users can access commonly used PBX features and
functions with their PTs, single line telephones (SLTs), and Direct Station Selection (DSS)
Consoles.

Trademarks

•

Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.

•

Celeron and Intel are trademarks or registered trademarks of Intel Corporation or its
subsidiaries in the United States and other countries.

•

All other trademarks identified herein are the property of their respective owners.

•

Screen shots reprinted with permission from Microsoft Corporation.

«
...
5
6
7
8
9
...
»

Summary of Contents for KX-TA824

























































































Reviews:

No comments

Related manuals for KX-TA824

TRU 5865 Series

Brand: Uniden Pages: 60

Brand: GE Pages: 18

Brand: Uniden Pages: 76

Brand: Uniden Pages: 64

Brand: Parkside Pages: 52

Brand: Panacom Pages: 16

Brand: Gigaset Pages: 74

Brand: Memorex Pages: 61

Brand: Hama Pages: 14

Brand: Uniden Pages: 32

Digital Cordless Telephone with Answer Machine

Brand: iDect Pages: 44

Brand: Philips Pages: 1

Brand: Philips Pages: 2

Brand: Philips Pages: 6

Brand: Philips Pages: 8

Brand: Philips Pages: 12

Brand: Philips Pages: 17

Brand: Philips Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands