Panasonic KX-TA1232, Programming Manual

Page: 17 / 216

General Programming Instructions
Programming Guide 17
1.6 Programming Example
Programming Example
The following programming instructions assume that you have already entered the
programming mode and that you will employ method (b) of "Going to another program
address" in Section 1.3
Programming Methods.
Example: Program [001] System Speed Dialing Number Set.
Description
Used to program the System Speed Dial numbers.
These numbers are available to all extension
users. There are 500 numbers available from 000
through 499.
Selection
• Speed dial number: 000 through 499
• Telephone number: 24 digits (max.)
Default
All speed dial numbers - Not stored
Programming
1. Enter 001.
Display: 001 SYS SPD DIAL
2. Press NEXT.
Display: SPD Code?
→
3. Enter a speed dial number.
To enter speed dial number 000,
you can also press NEXT.
Display example: 000:Not Stored
4. Enter a telephone number.
To delete the current entry, press
CLEAR.
To change the current entry, press
CLEAR and the new number.
5. Press STORE.
System Speed Dialing Number Set
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
[001] (1)
(1) Program address: This address is printed at the top
of every page to allow you to quickly find the
desired program.
(2) Program title.
(3) Provides a more detailed description of the
program.
(4) Shows you choices that you can assign.
(5) Shows you the default (factory setting).
(6) Shows you programming procedures step by step.
• While programming, use the overlay.
• Before starting to program, enter the
programming mode. (See "Entering the
programming mode" in section 1.2 "Using
Proprietary Telephones".)
Sample of Description Explanation
(7) Enter the program address.
(8)
(9)
The display shows the program title. If your
telephone has soft buttons, the lower line shows
the functions that are currently assigned to them.
Press the NEXT shown on the overlay.
(10) The message line advises you to enter a speed dial
number.
(11) If the telephone number has already been stored,
the number is displayed.
(12) Enter the telephone number that you want to store.
Your entry is displayed as you enter the digits.
(13) Pressing CLEAR erases the whole entry.
(14) Your entry is now stored.
The indicator lights red and a confirmation tone
lets you know that storage is complete.
pg.book 17 ページ ２００１年７月３日 火曜日 午後２時４４分