Panasonic KX-TA1232, Programming Manual

Page: 12 / 216

General Programming Instructions
12 Programming Guide
1.3 Programming Methods
Advancing to the next stage
When "
SYS-PGM NO?
" is displayed, you can select one of the following:
• To go to program [000], press the NEXT button.
• To go to another program, enter the 3-digit program address.
Storing your data
Press STORE to store your data.
• The STORE indicator lights red and a confirmation tone is emitted.
* Confirmation tone (one beep)
After pressing STORE, you will hear a beep. This informs you that storage is completed.
* Confirmation tone (two beeps)
This informs the user that the parameter has already been stored.
* Alarm tone (three beeps)
If you hear this alarm, your entry is not valid.
Making another selection within the same program address
• To make the next higher selection, press NEXT.
• To make the previous selection, press PREV.
• To make a specific selection, press SELECT and then enter the number.
Going to another program address
a) While displaying the program address and title:
• To go to the next larger program address:
Press or MESSAGE button.
• To go to the next smaller program address:
Press or SECRET (INTERCOM) button.
b) While programming:
• To go to a specific program address:
Press END, then enter the Program Address.
pg.book 12 ページ ２００１年７月３日 火曜日 午後２時４４分