manualshive.com logo in svg

Panasonic KX-T7400 Series, User Manual Addendum, Page: 45 / 68

Share
Download
Panasonic KX-T7400 Series User Manual Addendum Download Page 45

45

Other added items

Feature Title

Section of O/I

Item

2.3 Making

Calls

2.3 Making

Calls

2.3 Making

Calls

2.3 Making

Calls

Quick Dialling
Dialling Simply by
Pressing a Button 
(One-Touch Dialling)
Redialling
Redialling the Last
Dialled Number 
(Last Number Redial)
Redialling
Redialling the Saved
Number 
(Saved Number Redial)

Quick Dialling
Dialling with a System
Speed Dialling Button
(System Speed Dialling)

Please add the following to the conditions.
• If there is a PAUSE in the assigned numbers, the numbers

after the PAUSE are sent as DTMF signals.

Please add the following to the conditions.
• The caller’s name is programmable by PC programming.

To indicate the name on the display while receiving the
call, you must store the caller’s phone number with ‘-’
(hyphen) after the line access code.

2.3 Making

Calls 

Quick Dialling
Dialling with a SAVE
Button in Memo 
(Notebook Function)

Please add the following to the conditions.
• When you store a phone number during a conversation, the

current ISDN port access code is used. 
In on-hook status, the ISDN port access code is
automatically chosen as ‘9’.

2.6 Others 

Before Leaving Your
Desk
Forwarding a Call 
(Call Forwarding)

Please add the following to the conditions.
• You can use “

”to store a PAUSE. 

0 through 9 and 

are assignable (Call Forwarding to CO

line).

2.6 Others 

Caller Identification
Services 
(for KX-T7230 /
KX-T7235)
Recording the caller’s
Information 
(Incoming Call Log)

Please add the following to the conditions.
• While you are using the outside line, your extension also

automatically records information about the call. 
(KX-T7235, KX-T7230, KX-T7431, KX-T7433,

KX-T7436, KX-T7420, KX-T7425)

3.1 System

Management

Class of Service (COS)

Please add the following programming items.

12) Sets Call Forwarding by ISDN Service

Please add the following programming address.

[517] Call Forwarding by ISDN Service

3.7 ISDN Port

Programming

[408]–[409]
Extension Ringing
Assignment —
Day/Night for ISDN

Please add the following to Y, Delayed ringing selection. 

number 9 (disable)

Please add the extension numbers 31...34.
The Programming Table is on page 59.

Summary of Contents for KX-T7400 Series





































































Reviews:

No comments