4
Installations and connections
Installing the ink film
Control panel
1
2
Press
Open the control panel
and push it back until
it stops.
“T” shaped
gear (blue)
New ink film
3
2
“T” shaped gear (blue)
Right slot
Blue core
Wind the
“T” shaped
gear (blue)
to the arrow
direction.
Do not slacken.
1
Click
White core
White core
2
Install the ink film.
Take out the ink film from the bag, and find the
“T” shaped gear (blue).
1
3
Tighten the ink film and close the control panel.
If the ink film is slack, tighten it by winding the gear.
Insert the white core into the slots shown in the
picture below.
4
Close the control panel by pressing down on
both sides.
●
Make sure you close the control panel
securely by pressing down on both sides until
it locks.
2
Hold the ink film like in the picture below and
insert the blue core into the right slot of the main
unit.
Insert the “T” shaped gear (blue) into the left slot
of the main unit.
3
2
1
Open the control panel.
