9
M
OK
N
a
M
N
Note:
R
The order in which you enter the date
differs according to the selected display
language.
Example:
Arabic/Persian: Month/Date
English: Date/Month
R
Press
M
Stop
N
to stop the alarm completely.
R
When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R
Press any dial key or
M
Snooze
N
to stop the
sound but keep the snooze function
activated.
R
If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Night mode
Night mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
for example, while sleeping.
Important:
R
Make sure the unit’s date and time setting
is correct (page 12).
R
If you have set the alarm, the alarm sounds
even if the night mode is turned on.
Turning night mode on/off
1
M
Menu
N
(right soft key)
#238
2
MbN
: Select the desired setting.
a
M
OK
N
R
If you select
“
Off
”
, press
M
N
to
exit.
3
Enter the desired hour and minute you
wish to start this feature.
a
M
OK
N
4
Enter the desired hour and minute you
wish to end this feature.
a
M
OK
N
a
M
N
Changing the start and end time
1
M
Menu
N
(right soft key)
#237
2
Continue from step 3, “Turning night
mode on/off”, page 28.
Setting the ring delay
This setting allows the handset to ring during
night mode if the caller waits long enough.
After the selected amount of time passes, the
handset rings. If you select
“
No Ringing
”
,
the handset never rings during night mode.
1
M
Menu
N
(right soft key)
#239
2
MbN
: Select the desired setting.
a
M
OK
N
a
M
N
Selecting categories to bypass night
mode
1
M
Menu
N
(right soft key)
#241
2
Select your desired categories by
pressing
1
to
9
.
R
“ ” is displayed next to the selected
category numbers.
R
To cancel a selected category, press
the same dial key again. “ ”
disappears.
3
M
OK
N
a
M
N
Incoming call barring
This feature allows the unit to reject calls from
specified phone numbers that you do not want
to answer such as junk calls.
When a call is received, the unit does not ring
while the caller is being identified. If the phone
number matches an entry in the call barred
list, the unit emits no sound to the caller, and
disconnects the call. (Caller ID subscribers
only)
Important:
R
When the unit receives a call from a
number that is stored in the call barred list,
the call is logged in the caller list
(page 34) with
after the call is
disconnected.
28
Programming
PRW110BX_UE_(en-en)_1120_ver043.pdf 28
11/20/2013 1:50:57 PM
