Main menu:
“
Key detector
Sub-menu 1
Sub-menu 2
Settings
Code
Search
–
–
#655
–
Battery check
–
–
Main menu: “
Ring adjustments
Sub-menu 1
Sub-menu 2
Settings
Code
Ringer volume
–
0-6:
Off
-6 <6>
#160
–
Ringer tone
*4,
–
<
Tone 1
>
#161
–
Night mode
On/Off
1:
On
0:
<
Off
>
#238
Start/End
<
11:00 PM/06:00
AM
>
#237
Select group
1-9:
Group 1-9
#241
*1 If you program these settings using one of the handsets, you do not need to program the
same item using another handset.
*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“
Caller ID auto
”
. To turn this feature off, select
“
Manual
”
. (Call Display subscribers only)
To use this feature, set the date and time first (page 11).
*4 If you subscribe to a distinctive ring service, select a tone (tone 1 to 2). If you select a
melody, you cannot distinguish lines by their ringers.
*5 The preset melodies in this product (
“
Tone 3
”
-
“
Melody 30
”
) are used with permission of
© 2012 Copyrights Vision Inc.
*6 This setting is available when you have the key detector (KX-TGA20). Read the installation
manual for more information on the key detector.
*7 For models with supplied key detectors, the display shows
“
1:Detector1
”
.
*8 If you register 2 or more key detectors.
*9 If you have 2 or more key detectors.
*10 Wallpaper is displayed in the standby mode only when you select
“
Digital(Small)
”
or
“
Off
”
for this setting.
*11 You can select to display either a single item or multiple items on one screen at a time for
the handset main menu icons in function menu, recorded message list, phonebook list, caller
list, and redial list.
*12 You can set the handset display backlight while on charge.
–
“
On
”
: Backlight is on (dimmed).
–
“
Off
”
: Backlight turns off after 10 seconds of charging.
*13 If you subscribe to a Call Display service and want to view the caller’s information after lifting
up the handset to answer a call, turn off this feature.
*14 The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
25
Programming
PRS120C(en)_0121_ver110.pdf 25
2014/01/29 14:56:58
