– 10 –
Frequently asked questions
Question
Cause/solution
Why is
_
displayed?
L
The handset is too far from the base unit. Move closer.
L
The base unit’s AC adaptor is not properly connected. Reconnect
AC adaptor to the base unit.
L
The handset is not registered to the base unit. Register it.
1
Handset:
{
MENU
}
(right soft key)
(
13
)
2
Base unit:
Press and hold
{x}
for about 5 seconds.
3
Handset:
Press
{
OK
}
, then wait until a long beep sounds.
Why am I unable to pair a
cellular phone to the base
unit?
L
Depending on the compatibility of the cellular phone, you may not be
able to pair it to the base unit. For more information, please visit
http://www.panasonic.com/link2cell
L
Confirm that the Bluetooth feature of your cellular phone is turned
on. You may need to turn this feature on depending on your
cellular phone.
How can I increase the
handset volume level?
L
Press the navigator key
{^}
repeatedly while talking.
Why is the conversation
noisy or cutting off?
L
Try to relocate the base unit so that distance to the handset is
minimized.
L
If the same problem occurs even if the handset is next to the base
unit, please visit: http://www.panasonic.com/support
Can I add another
accessory handset to my
base unit?
L
Yes, you can add up to 6 handsets (including the handset(s) sold
with your base unit) to a single base unit.
L
To purchase additional accessory handset(s) (KX-PRLA20),
please visit: http://www.pstc.panasonic.com
TTY users (hearing or speech impaired users) can call 1-866-605-
1277.
Can I keep the batteries
charging all the time?
L
You can leave the handset on the base unit or charger anytime.
This will not harm the batteries.
How can I answer a call
waiting call (2nd call)?
L
Press
{
CALL WAIT
}
when you hear the call waiting tone.
PRL262_PRD262_QG(en).fm Page 10 Tuesday, February 18, 2014 10:19 AM
