2
MbN
: Select the desired setting.
3
M
OK
N
a
M
N
Note:
R
Some mobile phones may ask you if you
accept the connection requirement from the
base unit. In that case, select
“
Off
”
in step
2. Check the specifications of your mobile
phone.
Connecting/disconnecting the mobile
phone manually
If you will not be using the paired mobile
phone’s link to mobile feature temporarily (for
example, you do not want the unit to ring
when your mobile line receives a call), you
can disconnect your mobile phone from the
base unit. If you want to use it again,
reconnect the mobile phone to the base unit.
Note:
R
After you disconnect a paired mobile phone
from the base unit manually, it will
automatically be connected to the base unit
in 30 minutes. If you do not use the link to
mobile feature anymore, unpair the mobile
phone (page 20).
R
A disconnected mobile phone is not
unpaired from the base unit, so pairing it to
the base unit again is unnecessary.
Base unit
You can search for a mobile phone that is
paired to the base unit and connect to it easily.
Important:
R
This feature is available when Bluetooth is
not in use and neither the mobile phone nor
the unit are talking on a call.
Press
M N
and wait for a few seconds for the
mobile phone and base unit to connect to
each other.
Handset
1
To connect/disconnect:
For mobile 1:
M
N
(right soft key)
#6251
For mobile 2:
M
N
(right soft key)
#6252
R
A long beep sounds.
2
M
N
Mobile line only mode (If you do
not use the landline)
If you do not use the landline, we recommend
setting the unit to the mobile line only mode.
The default setting is
“
On
”
.
Important:
R
If you turn on the
“
Mobile Line Only
Mode
”
, disconnect the telephone line cord
from the base unit. Otherwise the
“
Mobile
Line Only Mode
”
cannot be activated.
1
M
N
(right soft key)
#157
2
To turn on:
MbN
:
“
On
”
a
M
OK
N
a
MbN
:
“
Yes
”
a
M
OK
N
To turn off:
MbN
:
“
Off
”
a
M
OK
N
Note:
R
Once you set this mode, you can use the
following buttons to make mobile calls for
the handset, press
M
N
or
MZN
instead of
M N
(page 24).
R
Once you set this mode, the following
features cannot be used:
– Landline features (page 41)
– Voice mail features (page 55)
R
After this mode is turned on or off, the base
unit reboots.
– Bluetooth connections from mobile
phones are disconnected. If the auto
connection is turned on (page 21), the
mobile phones are reconnected.
–
will be displayed on the handset
momentarily. The handset can be used
once
is displayed.
When you use the landline
Before connecting the telephone line to the
base unit, select
“
Off
”
in step 2, “Mobile line
only mode (If you do not use the landline)”,
page 22.
22
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Link to Mobile
PRL250EX1(en)1006_ver011.pdf 22
2014/10/06 15:04:34
