2
that the KX-NT400 will use to communicate over the
network.
PTAP Server
Enter the port number for the PTAP server.
•
Default: 9300
PTAP Client
Enter the port number for the KX-NT400 to use for
PTAP communication.
•
Default: 9301
Note
•
You can reset the settings to their default values
by pressing
Reset to Default
.
•
Consult your administrator for more details.
Quality of Service (QoS)
Settings
To establish voice communications between the
telephones, the primary port of the KX-NT400 and the
connected PBX must belong to the same VLAN.
Consult your administrator for details about the correct
values.
QoS Setting screen (1/2)
Select whether to enable communication over a VLAN
in the network. If you enable VLAN communication,
enter the VLAN IDs and VLAN priorities for
Primary
Port
and
Secondary Port
.
VLAN
Select whether to use VLAN to enhance the
network traffic controlling.
•
Default:
Disable
Primary Port
VLAN ID
Enter the VLAN ID number to which the PBX
belongs.
•
Default: 1
VLAN Priority
Enter the priority for the VLAN.
•
Default: 7
Secondary Port
VLAN ID
Enter the VLAN ID number to which the PBX
belongs.
•
Default: 2
VLAN Priority
Enter the priority for the VLAN.
•
Default: 0
Note
•
The KX-NT400 is equipped with 2 IP ports.
Therefore it is possible to place the primary and
Operating Instructions
169
Installation and Setup
