Feature Programming
The following table explains the features that are available in programming mode and how to programme them.
Note
•
The default values are displayed in
bold
.
Item
Programming
Input
Selection & Parameter
Display Language
Selection
Note
Changing this setting only
affects the language used
in the sub-display.
Select the language via the Language settings.
Display Switching Mode
Set whether the call duration for outside calls is
displayed on the
Calls
screen in Line Buttons mode.
If the
Calls
screen is set to Call List mode, the duration
is always displayed for both internal and external
calls, regardless of this setting.
•
Speed Dial
Store frequently dialled numbers in your contact list.
•
Managing Your Personal Contacts (Page 113)
Hot Line
Would you like to dial a preset
number simply by going
off-hook?
desired no. (max. 32 digits)
Do not use
Use
Calling Line Identification
Restriction (CLIR)
Should you prevent your
number being displayed on
the called party’s telephone?
No—Allows your number
to be displayed
Yes—Prevent your number
being displayed
Calling/Connected Line
Identification Presentation
(CLIP/COLP)
Which number should be
displayed on the called and
calling party’s telephone?
Caller ID assigned to your
extension
Caller ID assigned on the
outside line being used
Operating Instructions
135
Settings and Customisation
