Connection
12
Connection
PC connection/Switching Hub connection
•
Use a straight CAT 5 (or higher) Ethernet cable (not included) that is
6.5 mm in diameter or less.
•
For further information on the connection to a PC, refer to the
documentation provided for the PBX.
AC adaptor
•
Use a Panasonic AC adaptor KX-A239CE (PQLV206CE).
•
The AC adaptor is used as the main disconnect device. Ensure that
the AC outlet is located near the unit and is easily accessible.
CAUTION:
When selecting Ethernet cables
•
Use flexible, high-quality, snagless (without strain relief)
cables. Do not use cables with coating that may tear or crack
when bent.
When connecting cables
•
Ensure that the Ethernet cables and the AC adaptor cord are
clamped to prevent damage to the connectors.
•
Cables may be routed upwards by using the appropriate
cable clamp located on the back of the unit.
When connecting a headset and AC adaptor
•
Ensure that the headset cord and the AC adaptor cord are
wound around the hook to prevent damage to the connectors.
To a PC.
To a Switching Hub.
Optional AC adaptor
(not included).
<Back view>
Clamp
Headset
Recommended: KX-TCA89
AC adaptor
NT321NE_GQ.book Page 12 Thursday, September 11, 2008 6:57 PM
