Panasonic KX-NSX2000 Operating Manual Download Page 295

Page: 295 / 316

Features

Telephone Type

SLT

SIP

phone

1.14.3 Accessing System Features (System Feature Access)

1.14.4 Self Labelling (KX-NT366/KX-NT553/KX-NT556/
KX-NT560 only)

2.1.1 Extension Control

2.1.2 Time Service Mode Control

2.1.3 Restriction Level Control (Dial Tone Transfer)

2.1.4 Turning on the External Background Music (BGM)

2.1.5 Recording Outgoing Messages (OGM)

2.1.6 Allowing Users to Seize an Unavailable Outside Line
(Trunk Busy Out)

2.2 Configuring Unified Messaging Features

*10

3.1 Customising Your Phone (Personal Programming)

Assigning an Extension PIN to Your Extension

(Extension PIN [Personal Identification Number])

3.1.2 Settings on the Programming Mode

3.1.3 Customising the Buttons

4.1 Manager Programming

Changing Call Charges and Extension Control

Available telephones are as follows:

•

IP-PTs (except models with a single line display)

•

DPTs (except models with a single line display)

Live Call Screening (LCS)" and "

Recording Your Conversation" are only available for PTs and PSs.

Setting the Alarm (Timed Reminder)" is only available for PTs, SLTs and SIP phones.

OHCA is only available for certain DPTs.

Whisper OHCA is only available for IP-PTs and certain DPTs.

Only available for DPTs.

Only available for Display PTs.

Only available for the KX-NT300 series, KX-NT500 series, KX-DT300 series, and KX-DT500 series.

Only available for the KX-NT366 and KX-NT553/KX-NT556/KX-NT560.

*10

Setting the Timed Reminder" is only available for PTs, SLTs and SIP phones.

5.1.1 List of Operations by Telephone Type

Operating Manual

295

Summary of Contents for KX-NSX2000





























































































































































































































































































































Search results

Summary of Contents for KX-NSX2000

Reviews:

Related manuals for KX-NSX2000

Brands by name

Popular brands

Panasonic KX-NSX2000, Operating Manual

Search results

Summary of Contents for KX-NSX2000

Reviews:

Related manuals for KX-NSX2000

Brands by name

Popular brands