2.1 PT Programming
2.1.1 Programming Instructions
Required Telephone/Extension
PBX settings can be customised through system programming by using a multi-line display Digital Proprietary
Telephone (DPT) or IP Proprietary Telephone (IP-PT), such as the KX-NT343, KX-NT346 or KX-NT500 series.
Multi-line display Analogue Proprietary Telephones (APTs) are not supported. To access system programming,
the Class of Service (COS) assigned to the PT’s extension must be programmed to allow system programming,
or the PT must be connected to the lowest-numbered port on the card installed in the lowest-numbered slot.
Only one system programming session can be performed at a time. This means that only one user can access
system programming at a time, whether through a PT or PC.
For a list of characters that can be entered during system programming, see Section 1.1.3 Entering
Characters.
Buttons and Functions
Fixed Buttons
Function
KX-DT300/KX-DT500
KX-NT300/KX-NT500
KX-T7600
PREVIOUS
NEXT
(Page up)
(Page down)
ENTER
Back to Previous Menu
(CANCEL)
SHIFT
SHIFT
SHIFT
PAUSE
PAUSE
PROGRAM
HOLD
END
AUTO ANS
MUTE
MESSAGE
SELECT
16
PT Programming Manual
2.1.1 Programming Instructions
