Panasonic KX-NS500, Pc Programming Manual

Page: 570 / 1064

11.1.4.1 PBX Configuration—[3-1-4] Group—Trunk Group—Dialling
Plan—Auto Assign
It is possible to assign a set of leading numbers automatically.
Select Auto Assigning Table
Selects the set of preset leading number values to assign to the active dialling plan table. When Type D is
selected, you will be prompted to enter a 3-digit area code, and 7 "X"s, in cells 1 through 47 of the dialling plan
table.
Value Range
Type A:
•
1: N11
•
2: NXX XXXX
•
3: 1NXX NXX XXXX
•
4–50: Not stored
Type B:
•
1: N11
•
2: NNX XXXX
•
3: 1NPX NXX XXXX
•
4–50: Not stored
Type C:
•
1: N11
•
2: NXX XXXX
•
3: 1NNX XXXX
•
4: 1NPX NXX XXXX
•
5–50: Not stored
Type D:
•
1–47: Not stored
•
48: N11
•
49: NXX XXXX
•
50: 1NXX NXX XXXX
Type E:
•
1: N11
•
2: NXX NXX XXXX
•
3: 1NXX NXX XXXX
•
4–50: Not stored
Maintenance Console Location
11.1.4.1 PBX Configuration—[3-1-4] Group—Trunk Group—Dialling Plan—Auto Assign
PC Programming Manual References
11.1.4 PBX Configuration—[3-1-4] Group—Trunk Group—Dialling Plan
570 PC Programming Manual
11.1.4 PBX Configuration—[3-1-4] Group—Trunk Group—Dialling Plan