Panasonic KX-NS300CN, Pc Programming Manual

Page: 344 / 884

9.34 PBX Configuration—[1-2]
Configuration—Portable Station
Various portable station (PS) settings can be programmed.
PS Registration and De-registration
A PS must be registered to the PBX by programming both the PBX and PS before it can be used. Programming
instructions of the PBX are given below; programming instructions of the PS are found in the Installation
Manual.
It is possible to de-register the PS later.
PS Registration, De-registration, and Forced De-registration can be performed only in On-line mode.
Registration
Follow the steps below to register the PS.
1.
Click Registration .
A dialogue box will appear. Non-registered (available) extension numbers and names are displayed on the
left.
2.
Highlight PBX sites and click the right arrow to select them for registration. Click Next .
3.
If the registration is still in progress, the dialogue box will show "Registration Executing".
If the registration is successful, the dialogue box will show "Registration Completed". Click
Close .
Once a PS is successfully registered, the status of the PS will update to show "Registered".
De-registration
Follow the steps below to de-register the PS.
1.
Click De-registration .
A dialogue box will appear. Registered extension numbers and names are displayed on the left.
2.
Highlight numbers and names and click the right arrow to select them for de-registration. Click Next .
A dialogue box will appear.
3.
Click Confirm .
If the de-registration is successful, the dialogue box will show "De-registration Succeed".
4.
Click Close .
Once the PS is successfully de-registered, the status of the PS will update to show "None".
Forced De-registration
Follow the steps below to forcibly de-register the PS when normal de-registration has been unsuccessful or
de-registration has been performed only on the PS.
1.
Click Forced De-registration .
A dialogue box will appear. Registered extension numbers and names are displayed on the left.
2.
Highlight numbers and names and click the right arrow to select them for forced de-registration. Click
Next .
A dialogue box will appear.
3.
Click OK .
A dialogue box will appear.
4.
Click Confirm .
If the de-registration is successful, the dialogue box will show "Forced De-registration Succeed".
5.
Click Close .
Once the PS is successfully de-registered, the status of the PS will update to show "None".
344 PC Programming Manual
9.34 PBX Configuration—[1-2] Configuration—Portable Station