Panasonic KX-NS300CN, Pc Programming Manual

Page: 324 / 884

Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS,
AOC-D, AOC-E, E911, 3PTY
Specifies whether each ISDN or QSIG supplementary service is used.
The available services depend on the setting of
Port Type on this screen.
Value Range
For COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, E911:
No, Yes
For 3PTY:
No, Yes-3Pty
Feature Guide References
4.1.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
4.1.2.3 Advice of Charge (AOC)
4.1.2.4 Call Forwarding (CF)—by ISDN (P-P)
4.1.2.6 Call Transfer (CT)—by ISDN
4.1.2.7 Three-party Conference (3PTY)—by ISDN
4.1.2.9 Completion of Calls to Busy Subscriber (CCBS)
4.2.4.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name
Identification Presentation (CNIP/CONP)—by QSIG
4.2.4.3 Call Forwarding (CF)—by QSIG
4.2.4.4 Call Transfer (CT)—by QSIG
4.2.4.5 Completion of Calls to Busy Subscriber (CCBS)—by QSIG
CCBS Type
Selects the type of call from the network initiated by the CCBS (Completion of Calls to Busy Subscriber) feature,
from which the specified number of digits are deleted.
CCBS Delete Digits on this screen specifies the number of digits to delete from the received number.
Value Range
ALL, Unknown, International, National, Network specific, Subscriber, Abbreviated
Feature Guide References
4.1.2.9 Completion of Calls to Busy Subscriber (CCBS)
CCBS Delete Digits
Specifies the number of digits to delete from the received number when receiving a call of the specified type
initiated by the CCBS feature from the network.
CCBS Type on this screen specifies the applicable type of
call.
324 PC Programming Manual
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port