Panasonic KX-NS1000, Programming Manual

Page: 776 / 1182

14.6 PBX Configuration—[6-6] Feature—Tenant
A maximum of 32 or 128
*1
tenants can share the PBX. Each tenant is composed of specified extension user
groups. The PBX offers each tenant its own Time Table and system resources.
To assign extensions as operators easily, click
Extension No. Setting (see 2.1.7 Extension Number
Setting ).
*1 The maximum number of tenants depends on the System Capacity Selection setting made when the Easy Setup Wizard was run
for the PBX. If the System Resource Type was selected, the maximum number of tenants is 128. If the Standard Type or
IP-Extension Type was selected, the maximum number of tenants is 32. For details, refer to "5.4.1 Easy Setup Wizard" in the
Installation Manual.
Music On Hold
Specifies the audio source to be used for Music on Hold.
Value Range
Same as System Setting, BGM1, BGM2, BGM3, BGM4, BGM5, BGM6, BGM7, BGM8, Tone
Maintenance Console Location
14.6 PBX Configuration—[6-6] Feature—Tenant
PC Programming Manual References
10.2 PBX Configuration—[2-2] System—Operator & BGM
Feature Guide References
2.13.4 Music on Hold
5.1.3 Tenant Service
Operator (Extension Number)
Specifies the extension number or the floating extension number of an incoming call distribution group to be
designated as the tenant operator. When this parameter is left unspecified, the PBX operator serves as the
tenant operator.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
14.6 PBX Configuration—[6-6] Feature—Tenant
PC Programming Manual References
10.2 PBX Configuration—[2-2] System—Operator & BGM
Feature Guide References
5.1.3 Tenant Service
5.1.5 Operator Features
776 PC Programming Manual
14.6 PBX Configuration—[6-6] Feature—Tenant