Panasonic KX-NS1000, Programming Manual

Page: 330 / 1182

Ringing Tone
Selects the dual-tone switching pattern of the ring tone for incoming calls.
Value Range
A: 64 ms (697 Hz), 64 ms (852 Hz)
B: 32 ms (697 Hz), 32 ms (852 Hz)
C: 128 ms (697 Hz), 128 ms (852 Hz)
D: 32 ms (697 Hz), 96 ms (852 Hz)
Maintenance Console Location
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
IP Codec Priority
Specifies the codec used for compression and decompression of transmitted data.
Some codecs may become unavailable depending on the value set here, as follows:
–
When G.722 is selected, the priority is G.722
®
G.711
®
G.729A .
–
When G.711 is selected, the priority is G.711
®
G.729A ( G.722 is unavailable).
–
When G.729A is selected, both G.711 and G.722 are unavailable.
Value Range
G.711, G.729A, G.722
Maintenance Console Location
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Packet Sampling Time (G.711/G.722)
Specifies the time interval between measurements (samples) of sound data during a conversation.
The smaller this number, the higher the quality of the transmitted sound.
Value Range
20 ms, 30 ms, 40 ms, 60 ms
Maintenance Console Location
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
330 PC Programming Manual
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property