Panasonic KX-NS1000 Page 320 Operating Manual Download

Page: 320 / 366

For playback using the supervisor’s designated extension:

In the

Mailbox

filter, select the mailbox whose messages you want to display, and then click

Search

Select the check boxes for one or more messages to play.

At the bottom of the screen, select

Phone

Click the

(play)

button.

Note

ALL

has been selected for the

Mailbox

filter, the

(play)

button will be disabled. Select a

specific mailbox to enable the

(play)

button.

In the window that appears, enter the extension number in

Specify Extension

of the extension

at which to play back the messages, and then click

Connect

Go off-hook when the extension rings to establish a call with the UM message playback system.

During the call, click

Play

to listen to the currently selected message. If multiple messages were

selected in step

, you can click

Prev

and

Next

to cycle through and listen to the selected

messages.

When you are finished listening to messages, click

Disconnect

or go on-hook.

Logout

To logout of Web Maintenance Console, click the

(logout)

button to end the programming session and

return to the Login screen. When this option is chosen, system data is automatically backed up from the
PBX to the Storage Memory Card.

Click the

(logout)

button.

A confirmation message will be displayed.

Click

Yes

•

If the computer running the Web browser that is connected to Web Maintenance Console is
shut down, or the Web browser is closed, any changes that have not been saved will be
lost. Always end your programming session by clicking the

(logout)

button. For more

information, consult your System Administrator.

3.2.1 User Programming

320

Operating Manual

Summary of Contents for KX-NS1000















































































































































































































































































































































































Search results

Summary of Contents for KX-NS1000

Reviews:

Related manuals for KX-NS1000

Brands by name

Popular brands

Panasonic KX-NS1000, Operating Manual

Search results

Summary of Contents for KX-NS1000

Reviews:

Related manuals for KX-NS1000

Brands by name

Popular brands