Panasonic KX-NS1000, Installation Manual

Page: 223 / 416

Connection Mode setting Additional settings
Static IP •
WAN IP Address
*1
•
Subnet Mask
*2
•
Gateway
*1
•
Preferred DNS IP Address
*1
•
Alternative DNS IP Address
*1
DHCP •
If you select Obtain From DHCP in DNS Setting ,
address information is obtained from the DHCP
server.
•
If you select Static in DNS Setting specify the
following settings:
–
Preferred DNS IP Address
*1
–
Alternative DNS IP Address
*1
PPPoE Refer to "PPPoE Additional Settings".
Disable The built-in router does not operate
PPPoE Additional Settings
Specify the following settings:
Settings
Address Conf. Mode
Dynamic IP Unnumbered Static IP
User Name
*3
ü ü ü
Password
*3
ü ü ü
Service Name
*4
ü ü ü
WAN IP Address
*1
ü ü
Subnet Mask
*2
ü
Gateway
*1
Preferred DNS IP Address
*1
ü
Alternative DNS IP Address
*1
ü
Note
•
For details about configuring the parameters, refer to "27.2.1 Router
Configuration—Setup—[1-2-1] WAN—Connection Settings" in the PC Programming Manual.
•
For details about the values to set for the parameters, consult the network administrator.
c.
In IPSec (VPN) Connection (Trial Activation Key) , select Simple Configuration –VPSS .
Note
•
The IPSec feature will operate until the trial activation key expires. To continue using the IPSec
feature, the activation key (KX-NSN216) is required.
•
For details about manually changing parameters related to inter-site connections via IPSec
established by VPSS, refer to "27.9 Router Configuration—VPN—[3-1] VPSS" in the PC
Programming Manual.
Installation Manual 223
5.4.1 Easy Setup Wizard