manualshive.com logo in svg

Panasonic KX-NCP500, Feature Manual

Share
Download
Panasonic KX-NCP500 Feature Manual Download Page 96

Display Item

Display Example

Condition

Duration of the current CO line call

Line 001 11:02’28

–

Conditions

•

Multilingual Display

Each extension can select its display language through personal programming (Display Language
Selection).

•

Display Contrast

The display contrast can be adjusted through personal programming (Display Contrast Selection). This is
available only for digital proprietary telephones (DPTs) and IP proprietary telephones (IP-PTs).

•

Display Backlight

Some extensions can select whether to turn the display backlight on or off through personal programming
(Display Backlight Selection). For details, refer to the manual for your telephone.

•

Characters (name) or digits (number) exceeding the display’s limitations are not displayed. Although in this
case information may not be displayed properly, the received information is not altered.

PC Programming Manual References

4.18  [2-9] System Options—Option 5—

PT Feature Access—No. 1–8

6.1  [4-1-1] Wired Extension—Extension Settings—Option 5

→

Display Language

→

Incoming Call Display

→

Automatic LCD Switch when Start Talking

6.10  [4-2-1] Portable Station—Extension Settings—Option 5

→

Display Language

→

Incoming Call Display

→

Automatic LCD Switch when Start Talking

12.1  [10-1] CO Line Settings—

CO Name

Operating Manual References

3.1.2  Personal Programming

4.1.10  DND (Do Not Disturb)

Description

An extension user can make use of the DND feature. If this feature is set, calls will not arrive at the extension,
but will arrive at another extension using the Idle Extension Hunting feature (

®

 9.1.9  Idle Extension Hunting)

or the Intercept Routing—Busy/DND feature (

®

 9.1.11  Intercept Routing). When a destination cannot be

found, the calling extension will hear the DND tone, while the calling outside party will hear a busy tone.

Conditions

•

DND for CO Line Calls/Intercom Calls

The DND feature can be set for CO line calls, for intercom calls, or for both of them by the extension user.

•

DSS button in DND Mode

The DSS button light will turn red if the assigned extension has set DND.

96

Feature Manual

Document Version  2013-05  

4.1.10 DND (Do Not Disturb)

Summary of Contents for KX-NCP500







































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands