Panasonic KX-NCP1000GR, Service Manual

Page: 49 / 159

49
KX-NCP500GR
8.1.1.15. Utility-IP Extension Statistical Information
Displays accumulated statistical information on IP extensions, V-IPEXT32 cards, and the DSP card.
The displayed items are as follows:
To view IP extension information
1. From the Utility menu, select IP Extension Statistical Information.
2. From the Card Selection drop-down list, select the slot number for V-IPEXT32 cards.
"IPCMPR (VoIP-DSP)" can be selected for the DSP card when DSP Card Status is enabled.
3. Click Execute.
The statistical information will be displayed.
4. Select an option:
• Click Capture if you want to save the displayed information.
1. Enter a file name, or select a file to overwrite.
2. Click Save.
• Click Clear to erase the information and reset the Collection Started Time.
5. Click Cancel to return to the main screen.
8.1.1.16. Utility-CS Information
Displays information stored by the PBX regarding each Cell Station (CS).
This option is only available at Installer level, and requires that the target DHLC or DLC card be set to INS status.
The displayed items are as follows:
To view CS information
1. From the Utility menu, select CS Information.
2. From the Target CSI/F Slot No drop-down list, select the target slot.
• To display information on a single card, select the slot number and name of that card.
• To display information on all matching cards, select "All".
3. From the Interval Timer drop-down list, select the number of seconds between each automatic screen refresh.
4. Click Start to begin monitoring.
Monitoring will be performed and the screen will refresh according to the interval specified.
To refresh the screen manually at any time, click Refresh.
5. Click Stop to end monitoring.
6. Select an option:
• Click Capture if you want to save the displayed information.
1. Enter a file name, or select a file to overwrite.
2. Click Save.
• Click Cancel to return to the main screen.
Item Item Description
Collection Started Time Date and time the port was last reset.
Port No. Number of the port.
RTP Receive Packet Counter Total number of packets received.
RTP Receive Lost Packet Counter Total number of packets lost.
RTP Receive Abandoned Packet Counter Total number of packets abandoned.
RTP Arrive Packet Interval (MAX.) [ms] Maximum time taken for a packet to arrive.
RTP Arrive Packet Interval (MIN.) [ms] Minimum time taken for a packet to arrive.
Item Description
Slot Number of the slot.
Port Number of the port
CS Name Name of the attached CS
Status Service status of the attached CS: INS, OUS, or FAULT.
If the status is FAULT, subsequent data items for that port will be left blank.
Version Version number of the program file stored in the CS
Revision Revision number of the program file stored in the CS
CSID 12-digit ID number of the CS
Path Number of the wireless extension currently using each path. In the case of a group, several
extensions may be using the same floating extension number.
When an extension number is not registered, the display shows "OFF". Both 2.4 GHz PSs and
DECT PSs can use up to 2 paths. When using high-density CSs, DECT PSs can use up to 8
paths.
Group Call Number of PSs registered to the attached CS that are members of a PS Ring Group.