manualshive.com logo in svg

Panasonic KX-MC6260E, Operating Instructions Manual

Share
Download
Panasonic KX-MC6260E Operating Instructions Manual Download Page 81

9. Useful Information

81

9.5 SD card

You can print files stored on an SD card and save files to 
an SD card.
This unit supports the following commercially available 
memory cards. These are referred to as SD cards in the 
operating instructions.
–

SD Memory Card (up to 2 GB)

*1

–

SDHC™ Memory Card (up to 32 GB)

*1

–

miniSD™ Card (up to 2 GB) (adaptor required)

*2

–

miniSDHC™ Card (up to 16 GB) (adaptor required)

*2

–

microSD™ Card (up to 2 GB) (adaptor required)

*2

–

microSDHC™ Card (up to 16 GB) (adaptor 
required)

*2

*1 Equipped with a write-protect switch that can prevent 

data from being written to the card.

*2 First insert the card into the adaptor, and then insert 

the adaptor into the SD card slot. The card adaptor is 
equipped with a write-protect switch that can prevent 
data from being written to the card.

L

To ensure that the unit operates properly, we 
recommend the use of Panasonic SD cards.

Important:

L

Do not remove the SD card or turn the power 
switch off while reading or writing data to avoid 
damage to the data.

L

Be sure to make a backup copy of the data.

L

We are not responsible for any damages incurred 
to your SD card resulting from corrupted, or lost 
data.

L

When the write-protect switch is in the lock 
position, it is not possible to write data to the 
card. Be sure that the switch is unlocked (

1

) to 

ensure correct operation.

Note:

L

Confirm the SD card icon and the SD card access 
icon on the display (page 10). If the SD access icon 
is green, the SD card is working correctly.

L

An SD card is not supplied. Please purchase a 
supported SD card.

L

The access speed may be slightly different 
depending on the kind of SD card.

L

For details on the SD card, see the operating 
instructions of the SD card.

9.5.1 Inserting an SD card

Insert the SD card (

1

) with the labelled surface facing 

upward into the SD card slot (

2

).

9.5.2 Removing an SD card

1

Push the SD card in (

1

).

2

Pull the SD card (

2

) straight out.

File folder in an SD card

When you save files into the SD card, the following folder 
is made on the SD card.

SD:/PRIVATE/MEIGROUP/PCC/MFP/IMAGE/XXXXXX

(“XXXXXX” will vary depending on the unit.)

1

1

2

1

2

Summary of Contents for KX-MC6260E

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands