Panasonic KX-MC6020C Operating Instructions Manual Download Page 17

Page: 17 / 124

2. Preparation

2 Preparation

Connections and Setup

2.1 Connections

Caution:

When you operate this product, the power outlet
should be near the product and easily
accessible.

Note:

If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.

Using surge protectors

The warranty does not cover damage due to power
line surges or lightning. For additional protection, we
recommend using surge protectors (

If the unit shares a single telephone line with a DSL
service

Fax transmission/reception may be disturbed, noise
interference may be heard during telephone
conversations, or Call Display (page 53) may not
function properly. Please attach a DSL filter (

) to the

telephone line cord of the unit to prevent this. DSL filter is
provided by your DSL service provider.

Using network router/network hub

We recommend using network routers/network hubs
(

) to use the unit under sufficient security

condition. Consult your network administrator for
firewall settings, etc.

The warranty does not cover damage due to security
problems or any disadvantages relating to it.

Power cord

Connect to a power outlet
(120 V, 60 Hz).

Telephone line cord

Connect to a single telephone line jack (RJ11C).

[

EXT

]

jack

You can connect an answering machine or an
extension telephone. Remove the stopper if
attached.

Answering machine (not supplied)

To the internet

Network router/Network hub (not supplied)

Also connect networked computers.

LAN cable (not supplied)

To assure continued emission limit compliance,
use only shielded LAN cable (category 5 straight
cable).

Handset unit (optional) connection jack

You can connect the optional handset unit (page
78). Remove the cover if attached.

Automatic duplex unit (optional) connector

IMPORTANT NOTICE FOR THE USB
CONNECTION

DO NOT CONNECT THE UNIT TO A
COMPUTER WITH USB CABLE UNTIL
PROMPTED BY THE MULTI-FUNCTION
STATION (page 24).

Summary of Contents for KX-MC6020C





























































































































Search results

Summary of Contents for KX-MC6020C

Reviews:

Related manuals for KX-MC6020C

Brands by name

Popular brands

Panasonic KX-MC6020C, Operating Instructions Manual

Search results

Summary of Contents for KX-MC6020C

Reviews:

Related manuals for KX-MC6020C

Brands by name

Popular brands