manualshive.com logo in svg

Panasonic KX-MB783BR, Service Manual

The Panasonic KX-MB783BR is a versatile multi-function printer designed to meet all your office needs. With its comprehensive service manual available for free download, users can easily troubleshoot any issues and optimize the printer's performance. Visit our website to download the manual and maximize the potential of your Panasonic KX-MB783BR.

Share
Download
background image

92

KX-MB783BR

11.4.1. DESCRIPTIONS OF THE HISTORY REPORT

(1) ROM VERSION
FLASH ROM version
(2) SUM
FLASH ROM internal data calculation.
(3) YOUR LOGO
The user logo recorded in the unit. If it is not recorded,
NONE will be displayed.
(4) YOUR TELEPHONE NUMBER 
The user telephone number recorded in the unit. If it is not
recorded, NONE will be displayed.
(5) Not used
(6) FACTORY - CUSTOMER
This shows how many days from factory production until the
user turns ON the unit.
(7) MONTH
The shows the very first month, date, year and time set by
the user after they purchased the unit.
(8) DAY
The shows the very first month, date, year and time set by
the user after they purchased the unit.
(9) YEAR
The shows the very first month, date, year and time set by
the user after they purchased the unit.
(10) TIME
The shows the very first month, date, year and time set by
the user after they purchased the unit.
(11) USAGE TIME
The amount of time the unit has been powered ON.
(12) FACTORY - NOW
This shows how many days from factory production until the
user prints out this history list.
(13) TEL MODE
The amount of time the TEL mode setting was used.
(14) FAX MODE
The amount of time the FAX mode setting was used.
(15) Not used
(16) Not used
(17) FINAL RECEIVE MODE
The last set receiving mode by the user.
(18) TONE/PULSE SELECTION
The most recently used setting used, either TONE or
PULSE.
(19) RECEIVE REDUCTION
The compression rate when receiving.
(20) SETTING NO. OF DIRECTORY
The recorded directory stations (one touch dial).
(21) NUMBER OF COPY
The number of pages copied.
(22) NUMBER OF RECEIVE
The number of pages received.
(23) NUMBER OF SENDING
The number of pages sent.
(24) NUMBER OF CALLER ID
The number of times Caller ID was received.
(25) Not used
(26) NUMBER OF PC SCAN
The number of times multifunction was used for the Scan-
ner. (The number of pages scanned. If the unit does not
have a PC interface, NONE will be printed.)

(27) NUMBER OF PC-PRINT
The number of times multifunction was used for the Printer.
(The number of pages printed. If the unit does not have a
PC interface, NONE will be printed.)
(28) NUMBER OF RECEIVING TO PC
The number of times received in the PC through the USB
cable. (The number of pages received. If the unit does not
have a PC interface, NONE will be printed.)
(29) NUMBER OF SENDING FROM PC
The number of times transmitted from the PC through the
USB cable. (The number of pages transmitted. If the unit
does not have a PC interface, NONE will be printed.)
(30) Not used
(31) NUMBER OF PRINTING HELP
The number of help lists printed until now.
(32) NUMBER OF DIVIDED PRINTING IN FAX RECEP-
TION
The number of faxes received that were divided into more
than one sheet since the unit was purchased.
(33)  Not used.
(34), (35) Not used.
(36) FAX MODE
Means the unit received a fax message in the FAX mode.
(37) MAN RCV
Means the unit received a fax message by manual opera-
tion.
(38) FRN RCV
Means the unit received a fax message by friendly signal
detect.
(39) Not used
(40) RMT DTMF
Means the unit detected DTMF (Remote Fax activation
code) entered remotely.
(41) PAL DTMF
Means the unit detected DTMF (Remote Fax activation
code) entered by a parallel connected telephone.
(42) TURN-ON
Means the unit started to receive after 10 rings. (Remote
Turn On: Service Code #573)
(43) Not used
(44) IDENT
Means the unit detected Ring Detection.
(45) Not used
(46) Not used
(47) Not used
(48) Not Used
(49) Not Used
(50) Printing number of the drum unit
(51) Paddle rotation number of the drum unit
(52) CALL SERVICE 3  failure cause record (the latest)
(53) CALL SERVICE 3  failure cause record (the last time)
(54) CALL SERVICE 3  failure cause record (the second
last time)
(55) NUMBER OF DOCUMENT JAM
(56) NUMBER OF PAPER JAM
(57) NUMBER OF PICK UP ERROR OF RECORDING
PAPER TRAY #1
(58) NUMBER OF PICK UP ERROR OF RECORDING
PAPER TRAY #2 

Summary of Contents for KX-MB783BR























































































































































































































































































Reviews:

No comments

Related manuals for KX-MB783BR

Canon IR5000 - iR B/W Laser Driver Manual preview
IR5000 - iR B/W Laser
Brand: Canon Pages: 86
Datecs PP-55 User Manual preview
PP-55
Brand: Datecs Pages: 73
Datamax H-Class Quick Start Manual preview
H-Class
Brand: Datamax Pages: 12
Datamax E-Class Mark II Maintenance Manual preview
E-Class Mark II
Brand: Datamax Pages: 40
Datamax E-class E-3202 Quick Reference Manual preview
E-class E-3202
Brand: Datamax Pages: 46
Xerox 7760DN - Phaser Color Laser Printer Instruction Sheet preview
7760DN - Phaser Color Laser Printer
Brand: Xerox Pages: 6
Oki OKIFAX 5050 Specification Sheet preview
OKIFAX 5050
Brand: Oki Pages: 2
Ricoh BOOKLET MAKER BK5010 Installation Manual preview
BOOKLET MAKER BK5010
Brand: Ricoh Pages: 74
Ricoh MP 2001 Operating Instructions Manual preview
MP 2001
Brand: Ricoh Pages: 156
Xerox DocuColor 7002 Safety Manual preview
DocuColor 7002
Brand: Xerox Pages: 18
Wasp WPL606 Quick Start Manual preview
WPL606
Brand: Wasp Pages: 2
Compaq PrintNet 5525B User Manual preview
PrintNet 5525B
Brand: Compaq Pages: 238
Oki ML490 Series User Manual preview
ML490 Series
Brand: Oki Pages: 94
Canon PIXMA E300 series Getting Started preview
PIXMA E300 series
Brand: Canon Pages: 28
Canon MultiPASS F60 Basic Manual preview
MultiPASS F60
Brand: Canon Pages: 115
Canon MF754Cdw Important Safety Instructions Manual preview
MF754Cdw
Brand: Canon Pages: 124
Canon MP-C635 User Manual preview
MP-C635
Brand: Canon Pages: 216
Canon PIXMA iP7200 Series Setup Manual preview
PIXMA iP7200 Series
Brand: Canon Pages: 5

Brands by name

Popular brands

Load more brands