9. Programmable Features
50
Changing the password for
feature programming via
remote operation
{#}{
1
}{
5
}{
5
}
1.
{
MENU
}
i
{#}{
1
}{
5
}{
5
}
i
{
SET
}
2.
Enter the current password.
i
{
SET
}
L
The default password is
“
1234
”
.
3.
Enter a new 4-digit password using 0–9.
i
{
SET
}
4.
Enter the new password again.
i
{
SET
}
i
{
MENU
}
Note:
L
If you forget your current password,
“
0101
”
can always be entered in step
2 to continue changing the password.
L
This password is also used for feature programming via web browser.
Setting the ringer pattern
{#}{
1
}{
6
}{
1
}
{
1
}
“
A
”
(default)
{
2
}
“
B
”
{
3
}
“
C
”
Changing the ring count in
FAX ONLY mode
{#}{
2
}{
1
}{
0
}
{
1
}
“
1
”
{
2
}
“
2
”
{
3
}
“
3
”
(default)
{
4
}
“
4
”
{
5
}
“
5 EXT. TAM
”
(External Telephone Answering Machine)
Setting the Caller’s list to
print automatically
{#}{
2
}{
1
}{
6
}
{
0
}
“
OFF
”
(default): The unit will not print the Caller’s list, but will keep records
of the information for the last 30 callers.
{
1
}
“
ON
”
: The unit will print the Caller’s list automatically after every 30 new
Setting the time adjustment
{#}{
2
}{
2
}{
6
}
Using this feature, the unit’s date and time setting will be automatically adjusted
when caller information is received.
{
1
}
“
AUTO
”
(default): The date and time setting will be automatically adjusted.
{
2
}
“
MANUAL
”
: Deactivates this features.
Setting the recording paper
size in the paper input tray
{#}{
3
}{
8
}{
0
}
{
1
}
“
LETTER
”
(default): Letter size paper
{
2
}
“
A4
”
: A4 size paper
{
3
}
“
LEGAL
”
: Legal size paper
Setting the waiting time for
the power save mode
{#}{
4
}{
0
}{
3
}
To set the length of time before the unit enters the power save mode.
{
1
}
“
5min
”
: 5 minutes
{
2
}
“
15min
”
(default): 15 minutes
{
3
}
“
30min
”
: 30 minutes
{
4
}
“
1h
”
: 1 hour
Note:
L
During the power save mode, the unit needs to preheat the fuser unit before
printing.
Setting the default operation
mode
{#}{
4
}{
6
}{
3
}
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{
1
}
“
COPY
”
(default): Copy mode is selected as default.
{
2
}
“
FAX
”
: Fax mode is selected as default.
Note:
L
You cannot select the scan mode using this feature.
Setting the default operation
mode timer
{#}{
4
}{
6
}{
4
}
To set the timer before returning to the default operation mode (feature #463).
{
0
}
“
OFF
”
: Deactivates this feature.
{
1
}
“
30s
”
: 30 seconds
{
2
}
“
1min
”
(default): 1 minute
{
3
}
“
2min
”
: 2 minutes
{
4
}
“
5min
”
: 5 minutes
Feature/Code
Selection
MB781C-PFQX2742ZA-OI-en.book Page 50 Tuesday, September 4, 2007 1:24 PM
