Panasonic KX-MB3150CX Operating Instructions Manual Download Page 11

Page: 11 / 128

1. Introduction and Installation

{

Flash

}

To access special telephone services or for
transferring extension calls.

{

Tone

}

To change from pulse to tone temporarily during
dialling when your line has rotary/pulse service.

{

Start

}

To copy a document (page 37).

To scan a document (push scan) (page 33).

To send a fax (page 44).

*1 See page 12 for details.

1.4 Display descriptions

Feature mode

Displays the feature mode status.

Status bar

Displays the operation mode (page 21).

Displays date and time (page 23).

Displays error messages (page 88).

Main display

Displays the feature settings.

Displays received fax documents (page 52).

Displays error messages (page 88).

Button operation guide

Displays the available buttons for the
corresponding operations.

Note:

The displayed menu items may be different
depending on the operation. To select a menu item
not shown on the current page, scroll up or down by
using the navigator key.

Basic

Copy

Select Menu.

Copy:

Copies

Zoom

Contrast

Resolution

Page Layout

100%

Text/Photo

Disabled

Summary of Contents for KX-MB3150CX

































































































































Search results

Summary of Contents for KX-MB3150CX

Reviews:

Related manuals for KX-MB3150CX

Brands by name

Popular brands

Panasonic KX-MB3150CX, Operating Instructions Manual

Search results

Summary of Contents for KX-MB3150CX

Reviews:

Related manuals for KX-MB3150CX

Brands by name

Popular brands