Panasonic KX-MB262CX Operating Instructions Manual Download Page 17

Page: 17 / 88

2. Preparation

2 Preparation

Connections and Setup

2.1 Connections

Caution:

When you operate this product, the power outlet
should be near the product and easily
accessible.

Be sure to use the telephone line cord included in
this unit (KX-MB772 only).

Do not extend the telephone line cord (KX-MB772
only).

* The pictured model is KX-MB772.
*1 KX-MB772 only
*2 The power cord or telephone line cord may differ

slightly. Use the appropriate power cord or telephone
line cord for where you use the unit.

Note:

If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device (KX-MB772 only).

If you use the unit with a computer and your internet
provider instructs you to install a filter (

), please

connect it as follows (KX-MB772 only).

* The pictured model is KX-MB772.

A telephone handset cannot be connected directly to
this unit. To talk to the other party, please connect an
extension telephone (KX-MB772 only).

Power cord

Connect to a power outlet
(220–240 V, 50/60 Hz).

Telephone line cord

Connect to a single telephone line jack.

[

EXT

]

jack

You can connect an answering machine or an
extension telephone. Remove the stopper if
attached.

Answering machine (not included)

Important notice for the USB connection

Do NOT connect the USB cable until prompted by
the Multi-Function Station (page 23).

This model is designed to be used in Middle East,
Hong Kong, Malaysia, Asia, New Zealand, Africa
and Latin America according to the location
setting feature (KX-MB772 only).

The default setting is Middle East. To change the
location setting, see page 54 (feature #114).

Summary of Contents for KX-MB262CX

























































































Search results

Summary of Contents for KX-MB262CX

Reviews:

Related manuals for KX-MB262CX

Brands by name

Popular brands

Panasonic KX-MB262CX, Operating Instructions Manual

Search results

Summary of Contents for KX-MB262CX

Reviews:

Related manuals for KX-MB262CX

Brands by name

Popular brands