Panasonic KX-MB2100 series, Operating Instructions Manual

Page: 97 / 140

MFEN : “
ERASE ALL
” A M OK/SET N A M OK/SET N A Mw /STOP N
4. MCDN : Display the desired item. A Mt /MENU N A MBN
R To cancel erasing, press Mw /STOP N .
5. M OK/SET N A Mt /MENU N
10.2.2 Counter view and print for departments
Viewing the count number of copies/prints for departments
1.
Mt /MENU N A MBNM 4 NM 7 NM 9 N A M OK/SET N
2. Enter the administrator code (feature #151). A M OK/SET N
3. MCDFEN : Select the desired item. A Mt /MENU N
Printing a report of the count number of copies/prints for departments
1.
Mt /MENU N (repeatedly): “
PRINT REPORT
”
2. MFEN : “
DEPT.PRINT COUNT
” A M OK/SET N
3. Enter the administrator code (feature #151). A M OK/SET N
4. Mt /MENU N
Resetting the counters for departments
1.
Mt /MENU N (repeatedly): “
DEPARTMENT SETUP
” A MEN
2. Enter the administrator code (feature #151). A M OK/SET N
3. MFEN : “
RESET COUNTER
” A M OK/SET N
4. M OK/SET N A Mw /STOP N
R To cancel resetting, press Mw /STOP N .
Note:
R The count numbers of copies/prints will be reset only when the mode restriction (feature #154) is activated.
10.3 QUICK-JOB feature
You can pre-program frequently used scan/copy types (up to 3 for each). The following setting items can be
pre-programmed:
Scan Copy
Job name Job name
Scanning mode Page layout
PC selection
*1 Number
Scan type Original size
Scan size Input tray
Resolution Zoom rate
File format Resolution
Brightness Duplex
Contrast Edge
– Margin
*1 LAN supported models only ( y )
Programming the QUICK-JOB items
1.
Set the unit to a desired mode (scan or copy).
2. M[ /QUICK-JOB N
3. MCDN : Select the desired setting.
4. MFEN : Select the desired item.
97
10. Other Useful Features