Panasonic KX-MB2085CXW, Service Manual

Page: 75 / 276

75
KX-MB2085CXW/KX-MB2090CXW
11.1.3. Service Function Table
Code Function Set Value Effective
Range
Default Remarks
501 Pause time set X 100 msec 001~600 030 ----------
503 Dial speed select 1:10 pps
2:20 pps 1, 2 1 ----------
507 V34 transmission start speed 0: Disable
1: 33.6
2: 31.2
3: 28.8
4: 26.4
5: 24.0
6: 21.6
7: 19.2
8: 16.8 0~8 1 If the code 527 is set at 2, the code 507 and 508
work.
508 V34 reception start speed 0: Disable
1: 33.6
2: 31.2
3: 28.8
4: 26.4
5: 24.0
6: 21.6
7: 19.2
8: 16.8 0~8 1 If the code 527 is set at 2, the code 507 and 508
work.
514 Bell signal detect time X 100msec 1~9 6 ----------
520 CED frequency select 1:2100 Hz
2:1100 Hz 1, 2 1 See How To Output The Journal Report (P.127).
521 International mode select 1:ON 2:OFF 1, 2 1 See How To Output The Journal Report (P.127).
522 Auto standby select 1:ON 2:OFF 1, 2 1 The resolution reverts to the default when transmis-
sion is complete.
523 Receive equalizer select 1: 0 km
2: 1.8 km
3: 3.6 km
4: 7.2 km 1~4 1 Set RX equalizer to automatic mode.
524 Transmission equalizer select 1: 0 km
2: 1.8 km
3: 3.6 km
4: 7.2 km 1~4 1
527 V.8 function select 1:OFF 2:ON 1, 2 2
529 Call Service Clear
550 Memory clear Refer to Memory Clear Specification (P.77).
551 ROM check See Test Functions (P.70).
552 DTMF single tone test 1:ON 2:OFF 1, 2 2 See Test Functions (P.70).
553 Monitor on FAX communication
select 1:OFF
2:PHASE B
3:ALL 1~3 1 Sets whether to monitor the line signal with the
unit's speaker during FAX communication or not.
554 Modem test See Test Functions (P.70).
555 Scanner test See Test Functions (P.70).
556 Motor test 0 See Test Functions (P.70).
557 LED test See Test Functions (P.70).
558 LCD test See Test Functions (P.70).
561 KEY test See Test Functions (P.70).
567 T0 timer X second 001~255 052 Sets a higher value when the response from the
other party needs more time during automatic FAX
transmission.
570 BREAK % select 1:61% 2:67% 1, 2
1
*1
Sets the % break of pulse dialing according PBX.
571 ITS auto redial time set X number of
times 00~99 05 Selects the number of times that ITS is redialed
(not including the first dial).
572 ITS auto redial line disconnection
time set X second 001~999 185 Sets the interval of ITS redialing.
573 Remote turn-on ring number set X number of
rings 00~99 10 Sets the number of rings before the unit starts to
operate TAM in the TEL mode.
574 Dial tone detect check 1: ON 2: OFF 1, 2 2 ----------
590 FAX auto redial time set X number of
times 00~99 05 Selects the number of redial times during FAX com-
munication (not including the first dial).
591 FAX auto redial time disconnection
time set X second 001~999 185 Sets the FAX redial interval during FAX communi-
cation.