manualshive.com logo in svg

Panasonic KX-MB2061CXB, Service Manual

Share
Download
Panasonic KX-MB2061CXB Service Manual Download Page 180

180

KX-MB2061CXB/KX-MB2061CX2/KX-MB2062CXB

12.3.11.1. Journal 2

Refer to JOURNAL 2 in 

Printout Example

 (P.181).

Journal 2 displays the additional detailed information about the last 35 communications.

Descriptions:
(1) RCV. MODE

Indicates which receive mode the unit was in when the unit received a fax message.
This information is also displayed when the unit transmitted a fax message.

(2) SPEED

Indicates the speed of the communication. If multiple pages are transmitted or received, it indicates the last page’s communica-
tion speed. If there is a communication error, “?” is displayed.

(3) RESOLUTION

Indicates the resolution of the communication. If multiple pages are transmitted or received, it indicates the last page’s resolu-
tion. If there is a communication error, “?” is displayed.

(4) RCV-TRIG. (CNT.)

Indicates the trigger that causes the unit to switch to the fax receive mode. The available options are listed in JOURNAL 2 in 

Print-

out Example

 (P.181). The values in parentheses indicate how many times the trigger has been used. (For example, “0003” means

three times.)

(5) ERROR

→

MEMORY

Indicates the reason why the unit received a fax message in memory.

If you look at No.11 in the JOURNAL 2 in 

Printout Example

 (P.181), it shows the fax message was received in memory due to

“PAPER OUT” error.

NO RESPONSE DISAPPEARED ON JOURNAL
The “

NO RESPONSE DISAPPEARED ON JOURNAL

” displays the information about the last 10 communications terminated

by “No Response”. (Some of the communications terminated by “No Response” were not displayed in the JOURNAL.)
When a fax transmission cannot be performed because the other party’s unit is set to the TEL mode, “No response” will be
printed.

No.

Display

Function

1

FAX MODE

Means the unit received a fax message in the FAX mode.

2

MAN RCV

Means the unit received a fax message by manual operation.

3

FRN RCV

Means the unit received a fax message by friendly signal detection.

4

VOX

Means the unit detected silence or no voice.

5

RMT DTMF

Means the unit detected DTMF (Remote Fax activation code) entered remotely.

6

PAL DTMF

Means the unit detected DTMF (Remote Fax activation code) entered by a parallel connected tele-
phone.

7

TURN-ON

Means the unit started to receive after 10 rings. (Remote Turn On: Service Code #573)

8

TIME OUT

Means the unit started to receive after Ring Time Out.

9

IDENT

Means the unit detected Ring Detection.

10

CNG OGM

Means the unit detected the CNG while it was sending the OGM in the TAM/FAX mode.

11

CNG ICM

Means the unit detected the CNG while it was recording the ICM in the TAM/FAX mode.

Summary of Contents for KX-MB2061CXB





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands