3
Load the paper, print-side up (
B
).
Important:
R
Push down to lock the plate (
C
) in the paper
input tray, if necessary.
B
C
4
Adjust the recording paper guides. Pinch the front
side of the recording paper guide (
D
), then slide it to
match the paper size mark. Pinch the right side of the
recording paper guide (
E
), then slide it to adjust the
width to the size of the recording paper.
R
Make sure that the recording paper is under the
paper limit mark (
F
), and the paper should not
be loaded over the snubbers (
G
).
G
D
E
F
5
Insert the paper input tray into the base unit, lifting
the front part of the tray. Then push it completely into
the base unit.
Note:
R
If the paper is not loaded correctly, re-adjust the
paper guides, or the paper may jam.
R
If the paper input tray does not close, the plate in the
paper input tray may not be in the locked position.
Push the paper down and make sure that the paper
is laying flat in the paper input tray.
Caution for the paper input tray
R
Do not drop the paper input tray.
R
Hold the paper input tray with both hands when
removing or installing. The paper input tray
weighs approximately 2 kg (4.4 lb) when fully
loaded with recording paper.
Approx. 2 kg (4.4 lb)
17
1. Introduction and Installation
Summary of Contents for KX-MB2060C
Page 156: ...PNQX3482ZA CM0211TS0 CD ...
