Panasonic KX-MB2060, Operating Instructions Manual

Page: 103 / 160

11.2.2 Cordless handset setup
Alarm
An alarm sounds at the set time for 3 minutes once or
daily. Alarm can be set for each cordless handset.
Important:
R Set the date and time beforehand (feature #101 on
page 28).
1. M MENU N (soft key) A M # NM 7 NM 2 NM 0 N
2. Select the desired alarm option. A M SELECT N (soft
key)
“
Off
”
Turns alarm OFF. Go to step 6.
“
Once
”
An alarm sounds once at the set time.
“
Daily
”
An alarm sounds daily at the set time. Go to step
4.
3. Enter the desired month and date. A M OK N (soft
key)
4. Set the desired time.
R Press M AM/PM N (soft key) repeatedly to select
“
AM
” or “
PM
” . A M OK N (soft key)
R If you select Spanish for the language (feature
#110 on page 103), the time is set using a 24
hour clock.
5. Select the desired alarm tone. A M SELECT N (soft
key)
R We recommend selecting a different ringer tone
from the one used for outside calls.
6. M SELECT N (soft key) A M OFF N
R When the alarm is set, is displayed.
Note:
R To stop the alarm, press any dial key or place the
cordless handset on the charger.
R When the cordless handset is in use, the alarm will
not sound until the cordless handset is in standby
mode.
Display language
You can select either “
English
” or “
Español
” as the
display language. The default setting is “
English
” .
1. M MENU N (soft key) A M # NM 1 NM 1 NM 0 N
2. Select your desired language.
3. M SAVE N (soft key) A M OFF N
Changing the cordless handset name
Each cordless handset can be given a customized name
(“Bob”, “Kitchen”, etc.). This is useful when you make
intercom calls between cordless handsets. You can also
select whether or not the cordless handset name is
displayed in standby mode. The default setting is
“
Off
” . If you select “
On
” without entering any cordless
handset name, “
Handset 1
” to “
Handset 6
” is
displayed.
1. M MENU N (soft key) A M # NM 1 NM 0 NM 4 N
2. Enter the desired name, up to 10 characters (see
page 106 for character entry).
R If not required, go to step 3.
3. M SAVE N (soft key)
4. Press MCN or MDN repeatedly to display the desired
setting. A M SELECT N (soft key)
5. M SELECT N (soft key) A M OFF N
103
11. Programmable Features