Panasonic KX-MB1520FX7, Service Manual

Page: 84 / 396

84
KX-MB1520FX7/KX-MB1520FX8/KX-MB1520FXW/KX-MB1530FX7/KX-MB1530FXW
8.1.2. Recording Paper
Note for recording paper:
• We recommend that you test paper (especially special sizes and types of paper) on the unit before purchasing large quantities.
• Do not use the following types of paper:
- Paper with cotton and/or fibre content that is over 20%, such as letterhead paper or paper used for resumes
- Extremely smooth or shiny paper, or paper that is highly textured
- Coated, damaged or wrinkled paper
- Paper with foreign objects attached, such as tabs or staples
- Paper that has dust, lint or oil stains
- Paper that will melt, vaporize, discolour, scorch or emit dangerous fumes near 200

C, such as vellum paper. These materials
may transfer onto the fusing roller and cause damage.
- Moist paper
- Inkjet paper
• Some paper is designed to be printed on only one side. Try printing on the other side of the paper if you are not happy with the
print quality, or if misfeeding occurs.
• For proper paper feeding and best print quality, we recommend using long-grained paper.
• Do not use paper of different types or thicknesses at the same time. This may cause paper jams.
• Avoid double-sided printing.
• Do not use paper printed from this unit for double-sided printing with other copiers or printers.
This may cause paper jams. Do not use paper printed from other copiers or printers for printing with this unit. This may cause
paper jams.
• To avoid curling, do not open paper packs until you are ready to use the paper. Store unused paper in the original packaging, in
a cool and dry location.
• For customers who live in high humidity areas:
Please be sure to store paper in an air-conditioned room at all times. If you print using moist paper, it may cause paper jam.
8.1.2.1. Paper input tray
The paper input tray unit can hold the following paper. If you load more than the specified amount of paper, paper jam may occur
and the paper may be damaged.
— Up to 150 sheets of 64 g/m
2
to 75 g/m
2
paper.
— Up to 130 sheets of 90 g/m
2
paper.
• A4, letter and 16K-size paper can be used. 16K-size paper can only be used when using the unit for printing or copying.
• The unit is set for printing A4-size plain paper by default.
• To use other paper sizes, change the recording paper size setting (feature #380). (Refer to
Program Mode Table (P.117)).
• To use thin paper, change the recording paper type setting (feature #383).
(Refer to Program Mode Table (P.117)).
1.
Lift the paper input tray (1), and pull it completely out.
2. Before loading a stack of paper, fan the paper to prevent paper jams.