Panasonic KX-MB1520FX7, Service Manual

Page: 104 / 396

104
KX-MB1520FX7/KX-MB1520FX8/KX-MB1520FXW/KX-MB1530FX7/KX-MB1530FXW
592 CNG transmit select 1:OFF
2:ALL
3:AUTO 1~3 2 Lets you select the CNG output during FAX trans-
mission. ALL: CNG is output at phase A. AUTO:
CNG id output only when automatic dialing is per-
formed. OFF: CNG id not output at phase A. Refer
to
Sometime There is a Transmit Problem
(P.153).
593 Time between CED and 300bps 1:75 msec
2:500 msec
3:1 sec 1~3 1 See How To Output The Journal Report (P.160)
and Receive Problem (P.154).
594 Overseas DIS detection select 1:detects at
the 1st time
2:detects at
the 2nd time
1, 2 1 See How To Output The Journal Report (P.160)
and Sometime There is a Transmit Problem
(P.153).
595 Receive error limit value set 1: 5%
2: 10%
3: 15%
4: 20% 1~4 2 If the number of errors during transmission exceeds
this value, the sending side terminates the call.
596 Transmit level set X dBm - 15~00 11 Selects the FAX transmission level. Refer to Some-
time There is a Transmit Problem (P.153) and
Receive Problem (P.154).
598 Receiving sensitivity 43= -43 dBm 20~48 48 Used when there is an error problem. Refer to How
To Output The Journal Report (P.160).
599 ECM frame size 1:256 / 2:64 1, 2 1 ----------
628 H.V.P.S. check See Test Functions (P.98).
639 LSU test See Test Functions (P.98).
655 Cause Distinction Code of Call Service 3 See CALL SERVICE Troubleshooting Guide
(P.127).
677 FAN test See Test Functions (P.98).
710 Memory clear except History data Refer to Memory Clear Specification (P.105).
711 Dialing mode 1:PULSE
2:TONE 1,2 2
717 Transmit speed select 1:14400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS 1~6 1 If the code 527 is set at 1, the code 717 and 718
work.
718 Receive speed select 1:14400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS 1~6 1 If the code 527 is set at 1, the code 717 and 718
work.
721 Pause tone detect 1:ON / 2:OFF 1, 2 2 Selects the tone detection for pause in dialing.
722 Redial tone detect 1:ON / 2:OFF 1, 2 1 Sets the tone detection mode after redialing.
763 CNG detect time for friendly reception 1:10 sec
2:20 sec
3:30 sec
1~3 3 Selects the CNG detection tone of friendly recep-
tion.
774 Receiving T4 timer X 100 msec 00~99 00 Use this function when delay occurs in the line and
communication.
(ex. Mobile comm) does not work well.
775 Transmission T4 timer X 100m sec 00~99 00 Use this function when delay occurs in the line and
communication.
(ex. Mobile comm) does not work well.
815 Sensor check See Test Functions (P.98).
852 Print test pattern See Test Functions (P.98).
853 Top margin X 0.5mm 01~11 06 ----------
854 Left margin X 0.5mm 01~11 06 ----------
874 DTMF ON time X msec 060~200 100 ----------
875 DTMF OFF time X msec 060~200 100 ----------
880 History list See History (Example of a printed out list)
(P.111).
881 Journal 2 list See Journal 2 (P.157).
882 Journal 3 list See Journal 3 (P.158).
Code Function Set Value Effective
Range
Default Remarks