Panasonic KX-MB1500C, Operating Instructions Manual

Page: 47 / 80

Feature/Code Selection
Setting the ADSL mode
MBNM 1 NM 2 NM 4 N
(KX-MB1520 only)
When you use a DSL/ADSL line, this feature improves the reliability by reducing
the transmission speed.
M 0 N “
OFF
” (default)
M 1 N “
ON
”
Note:
R Calling charges may be higher than usual.
Changing the LCD display
contrast
MBNM 1 NM 4 NM 5 N
M 1 N “
NORMAL
” (default)
M 2 N “
DARKER
”
Selecting the scale
MBNM 1 NM 4 NM 7 N
M 1 N “
MILLIMETRES
”
M 2 N “
INCHES
” (default)
Note:
R The selected scale will be used when measurements are shown on the
unit’s display.
Changing the password for
feature programming via
remote operation
MBNM 1 NM 5 NM 5 N
1. M Menu N A MBNM 1 NM 5 NM 5 N A M Set N
2. Enter the current password. A M Set N
R The default password is “
1234
” .
3. Enter a new 4-digit password using 0-9. A M Set N
4. Enter the new password again. A M Set N A M Menu N
Note:
R It is recommended that you change this password from the default
password.
Setting the toner
maintenance time
MBNM 1 NM 5 NM 8 N
(KX-MB1520 only)
The unit will automatically activate for maintenance, once every 24 hours.
Because this is to prevent the toner from solidifying, the noise that the unit
makes during maintenance cannot be stopped. However, if the unit’s noise
bothers you, you can change the start time.
1. M Menu N A MBNM 1 NM 5 NM 8 N A M Set N
2. Enter the maintenance start time.
R The default time is “
12:00PM
” .
R Press MGN repeatedly to select “
AM
” or “
PM
” .
R If you select French for the language (feature #110 on page 46), the
default time is
“ 12:00 ” .
3. M Set N A M Menu N
Resetting all features (and
deleting all data in memory)
MBNM 1 NM 5 NM 9 N
Before you dispose of, transfer or return the product, activate this feature to
reset all programmable features and to delete all data stored in memory.
KX-MB1520 only: Phonebook (or caller information) and fax transmission data
(journal report and faxes received in memory) will be deleted.
M 0 N “
NO
” (default)
M 1 N “
YES
”
R Disconnect the telephone line cord (KX-MB1520 only) and USB cable
before activating this feature.
To reset all features:
1.
M Menu N A MBNM 1 NM 5 NM 9 N
2. Press M 1 N to select “
YES
” . A M Set N
3. Press M 1 N to select “
YES
” . A M Set N
Setting the ringer pattern
MBNM 1 NM 6 NM 1 N
(KX-MB1520 only)
M 1 N “
A
” (default)
M 2 N “
B
”
M 3 N “
C
”
47
9. Programmable Features