Panasonic KX-MB1500C, Operating Instructions Manual

Page: 19 / 80

2.5 Date and time (KX-MB1520
only)
We recommend setting the date and time. The other
party will receive your unit’s date and time as the header
information.
M Set N MFNMEN
M Menu N
M Fax N
1
M Menu N A MBNM 1 NM 0 NM 1 N A M Set N
2
Enter the current month/date/year by selecting 2
digits for each.
Example: August 3, 2011
M 0 NM 8 N M 0 NM 3 N M 1 NM 1 N
3
Enter the current hour/minute by selecting 2 digits for
each.
Example: 10:15 PM (12 hour clock format)
1.
M 1 NM 0 N M 1 NM 5 N
2. Press MGN repeatedly to select “
PM
” .
4
M Set N
5
Press M Menu N to exit.
Note:
R To check the current date and time setting,
temporarily change the unit to the fax mode by
pressing
M Fax N repeatedly (page 17).
R Your unit’s date and time will be used as the header
information for the following:
– When sending faxes (page 35).
R If the date and time is not set correctly, the other party
will receive an incorrect date and time as their
header. This may confuse the other party.
R The accuracy of the clock is approximately ±60
seconds a month.
R If you select French for the language (feature #110
on page 46), the time is set using a 24 hour clock.
Example: 15:15
Press M 1 NM 5 N M 1 NM 5 N .
To correct a mistake
Press MFN or MEN to move the cursor to the incorrect
number, and make the correction.
If you have subscribed to a Call Display service
The date and time will be automatically set according to
the received caller information.
R If the time has not previously been set, Call Display
will not adjust the clock.
R You can turn this feature OFF (feature #226 on
page 48).
19
2. Preparation