Panasonic KX-MB1500C Page 61 Operating Instructions Manual Download

Page: 61 / 80

Display

Cause & Solution

“

MEMORY FULL

”

When performing memory transmission, the document being stored
exceeded the memory capacity of the unit. Send the entire document
manually.

When making a copy, the document being stored exceeded the memory
capacity of the unit. Press

Stop

to clear the message. Divide the

document into sections.

“

MODEM ERROR

”

There is something wrong with the unit’s modem. Contact our service
personnel.

“

NO FAX REPLY

”

The other party’s fax machine is busy or has run out of recording paper. Try
again.

“

OUT OF PAPER INPUT TRAY

”

Recording paper is not loaded in the manual input tray. Load paper
(page 16).

“

PAPER IN TRAY #2

”

The recording paper is installed in the manual input tray (page 16).

“

PAPER JAMMED

”

“

OPEN REAR COVER

”

“

OPEN FRONT COVER

”

A recording paper jam occurred. Remove the jammed paper (page 68).

“

PC FAIL OR BUSY

”

The cable between the unit and the computer is not connected correctly.
Check the connections (page 12, 22).

The computer has some kind of problem. (Example: Make sure that the
computer is turned ON.)

The software is not running on the computer. Restart the software and try
again.

“

PHONEBOOK FULL

”

There is no space to store new items in the phonebook. Erase unnecessary
items (page 36).

“

PLEASE WAIT

”

The unit is warming up. Wait for a while.

“

REDIAL TIME OUT

”

The other party’s fax machine is busy or has run out of recording paper. Try
again.

“

REMOVE PAPER IN INPUT

TRAY #2

”

The recording paper is installed in the manual input tray when trying to
receive faxes or print reports. Remove the recording paper from manual
input tray.

“

RX MEMORY FULL

”

The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Load paper (page 13) or remove the jammed
paper (page 68).

If the PC fax (feature #442 on page 53) is set to

“

ALWAYS

”

– check the connection between the computer and the unit.
– check that the computer is turned ON.

“

TONER EMPTY

”

“

CHANGE CARTRIDGE

”

The toner is empty. Replace the toner cartridge immediately.

“

TONER LOW

”

“

REPLACE SOON

”

The toner is reaching the end of its life. You will need to replace the toner
cartridge soon.

“

TRANSMIT ERROR

”

A transmission error occurred. Try again.

11. Help

Summary of Contents for KX-MB1500C

















































































Search results

Summary of Contents for KX-MB1500C

Reviews:

Related manuals for KX-MB1500C

Brands by name

Popular brands

Panasonic KX-MB1500C, Operating Instructions Manual

Search results

Summary of Contents for KX-MB1500C

Reviews:

Related manuals for KX-MB1500C

Brands by name

Popular brands