Step 2: Connect KX-HDV series to KX-HTS series
Step 3: Change the Network settings of KX-HDV series
For connecting the KX-HDV series (e.g., KX-HDV230) to the existing user network, configure the following settings:
Step 4: Connect KX-HDV series to the existing user network
Repeat Steps 2 to 4 for the number of KX-HDV series to be registered.
KX-HTS series
KX-HDV series
(e.g., KX-HDV230)
Dec.31
12:45PM
101
Note
If the extension number is not displayed on the LCD of KX-HDV series
for more than 10 minutes after connecting the KX-HDV series to the
KX-HTS series, initialize the KX-HDV series. Refer to the Web site at:
http://www.panasonic.net/pcc/support/pbx/manual/kx-hts/index.html
2. KX-HDV series will be registered to KX-HTS series
automatically. Confirm that an extension number (e.g., 101) is
displayed on the LCD of KX-HDV series.
1.
Connect the “LAN” port of KX-HDV series to the "LAN”
port of KX-HTS series.
e.g., K-HDV230:
Back view
LAN port
1. Press
Menu
2. [
▲
]/[
▼
]: “System Settings”
→
OK
3. [
▲
]/[
▼
]: “Network Settings”
→
OK
IPv4 Settings
DHCP
Static
4. [
▲
]/[
▼
]: “IPv4 Settings”
→
OK
IP Address
192.168. 22. 151
6. Enter the IP address
*1
→
Next
Subnet Mask
255.255.255. 0
Default Gateway
192.168. 22. 99
Error:003
Not Registered
7. Enter the subnet mask
→
Next
8. Enter the default gateway
*2
→
OK
“Not Registered” will be displayed.
Dec.31
12:45PM
101
Status
Network Settings
System Settings
Status
Network Settings
System Settings
IP Mode Select
IPv4 Settings
IPv6 Settings
5. [
▲
]/[
▼
]: “Static”
→
OK
*1 Enter the IP address according to the IP address system of the existing user network. Also, please set the IP
address which does not duplicate other IP device.
*2 For the default gateway setting, enter the IP address of the WAN1 port of KX-HTS series which is the same
value as “IP Address, by your ISP” shown as below. DO NOT set the IP address of the existing router.
Network Configuration > 3.WAN > 1.WAN Setting
KX-HTS series
Existing Router
KX-HDV series
(e.g., KX-HDV230)
Dec.31
12:45PM
101
e.g., K-HDV230:
1.
Disconnect the KX-HDV series from the LAN port of KX-HTS
series, and connect to the existing router.
2. KX-HDV series will be registered to KX-HTS series
automatically. An extension number is displayed on
the LCD of KX-HDV series.
PNQW5376ZA-VB PP0117TN0
