Testing the motion
sensor
You can observe the motion sensor’s
LED indicator and test the performance
of the motion sensor.
1
Press
M
N
.
2
Move to an area near the motion
sensor.
3
While moving near the motion
sensor, observe the LED indicator.
R
When motion is detected, the
LED indicator lights in red.
4
Note the areas where movement
is detected.
5
Press
M
N
again.
Adjusting the sensor
sensitivity
You can use the
M
HIGH
N
/
M
LOW
N
switch
(page 8) to adjust the sensor’s
sensitivity. If the sensor often makes
incorrect detections, such as in areas
with frequent and substantial
temperature fluctuations, set the switch
to the
M
LOW
N
position.
Note:
R
When the switch is in the
M
LOW
N
position, the sensor detection range
is reduced by about half (compared
to when the switch is in the
M
HIGH
N
position).
Features available
when using the
[Home Network] app
Some of the motion sensor’s features
that are available when using the
[Home Network]
app are listed below.
For more information, refer to the
User’s Guide (page 15).
–
Alarm system
You can use the app to arm and
disarm the alarm system, confirm
the current status of the sensor, and
view a log of previous events.
–
Sensor integration
You can configure the motion sensor
to trigger other system events, such
as camera recording, turning on an
electric device (such as a lamp), etc.
(Appropriate device required.)
–
Telephone alert
You can configure the system to call
a preprogrammed phone number
when the motion sensor is triggered.
Accessing the User’s
Guide
The User’s Guide is a collection of
online documentation that helps you
get the most out of the
[Home
Network]
app.
1
iPhone/iPad
Tap
in the app’s home screen.
Android™ devices
Tap or press your mobile
device’s menu button in the app’s
home screen.
2
Tap
[User’s Guide]
.
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
15
Appendix
HNS102E_(en_en)_0421_ver.060.pdf 15
2015/04/21 14:01:24
