*1 The corresponding models are
subject to change without notice.
Setup overview
1
Initial setup
Make sure you can access the
system using your mobile device.
For details, refer to the System
Setup Guide included with your
hub.
2
Insert the battery
The battery will supply power to
the connected device in the event
of a power failure.
3
Connections
Connect the backup battery to the
power outlet and to the device it
will supply power to.
4
Registration
Required only if the backup battery
was purchased separately (i.e.,
not as part of a bundle).
5
Confirm the usage area
Read the information in this
document to confirm that the
desired usage area is suitable to
proper operation.
Inserting the battery
R
USE ONLY the specified battery.
R
Wipe the battery ends (
,
) with
a dry cloth.
R
Avoid touching the battery ends (
,
) or the unit contacts.
1
Press the notch on the battery
cover firmly.
2
Slide it in the direction of the arrow.
3
Insert the battery.
4
Close the battery cover.
Connections
4
3
1
2
1
Insert the power supply plug firmly
into the DC jack of the compatible
device.
Connect the AC adaptor plug to
the backup battery.
For assistance, please visit www.panasonic.com/support
9
Setup
Shinsei_HNP100_(en_us)_0420_ver.000.pdf 9
2015/04/20 11:39:45
