*1 If you program these settings using one of the units, you do not need to program the same
item using another unit.
*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 The preset melodies in this product are used with the following permission:
–
“
Ringtone 3
”
: © 2014 Copyrights Vision Inc.
–
“
Ringtone 4
”
-
“
Ringtone 40
”
: © 2012 Copyrights Vision Inc.
*4 If you do not want the unit to ring before the caller information is received, set to
“
Off
”
.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your phone service provider.
*5 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*6 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*7 To prevent other users from joining your conversations with outside callers, turn this feature
on.
Handset alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R
Make sure the unit’s date and time setting
is correct. The time setting of the system is
configured with the date and time of the
mobile device registered to the hub. If a
mobile device is not registered to the hub,
register it to the hub by following the
instructions in the System Setup Guide of
the hub.
1
M
N#720
2
Select an alarm by pressing
1
to
3
.
a
M
OK
N
3
MbN
: Select the desired alarm option.
a
M
OK
N
“
Off
”
Turns the alarm off. Go to step 9.
“
Once
”
The alarm sounds once at the set time.
“
Daily
”
The alarm sounds daily at the set time.
Go to step 5.
“
Weekly
”
Alarm sounds weekly at the set time(s).
4
Proceed with the operation according to
your selection in step 3.
n
Once:
Enter the desired date and month.
a
M
OK
N
n
Weekly:
MbN
: Select the desired day of the week
and press
M N
.
a
M
OK
N
5
Set the desired time.
a
M
OK
N
R
You can select 24-hour or 12-hour
clock format (
“
AM
”
or
“
PM
”
) by
pressing
*
.
6
Enter a text memo (10 characters max.).
a
M
OK
N
7
MbN
: Select the desired alarm tone.
a
M
OK
N
R
We recommend selecting a different
ringer tone from the one used for
outside calls.
8
MbN
: Select the desired snooze setting.
a
M
OK
N
9
M
OK
N
a
MeN
28
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
Programming
HNH100E_(en_en)_0421_ver.051.pdf 28
2015/04/22 19:08:47
