Panasonic KX-HNC710W, Installation Manual

Page: 18 / 44

2
Siding
3
Structure behind siding
Concrete
R Do not use the included screws.
Use screw anchors (screw
ø4 mm (
5
/
32
inches)) designed
for concrete walls.
R Carefully read the instructions
supplied with the anchors.
Follow instructions regarding
drill bit diameter, hole depth, etc.
R Drill a pilot hole. Remove any
debris after drilling the pilot hole.
1
Mark the hole depth on the
drill bit (
1
) and then drill a
pilot hole.
1
2
Remove debris.
3
Insert an anchor, tighten the
screw, then remove the screw
to secure the anchor.
4
Insert the screw and tighten it.
2
2
Wall mounting adaptor
ALC (autoclaved lightweight
cellular concrete)
R Depending on the type of ALC
panel, you may not be able to
attach the camera. Consult the
ALC panel manufacturer.
R Do not use the included screws.
After consulting the
manufacturer of the ALC panel,
use only commercially-available
metal screw anchors (screw
ø4 mm (
5
/
32
inches)) designed
for ALC panels.
R Carefully read the instructions
supplied with the anchors.
Follow instructions regarding
drill bit diameter, hole depth, etc.
R Drill a pilot hole. Remove any
debris after drilling the pilot hole.
R Seal the pilot hole with a
commercially-available
waterproof sealant.
Other materials (mortar, tile,
etc.)
R Do not use the included screws.
R Consult the builder or licensed
professional regarding the type
18 For assistance, please visit http://shop.panasonic.com/support
Setup
HNC710_(en_en)_0207_ver.110.pdf 18 2018/02/07 20:11:47