2
Remove debris.
3
Insert an anchor, tighten the screw, then
remove the screw to secure the anchor.
4
Insert the screw and tighten it.
2
2
Camera mounting stand
ALC (autoclaved lightweight cellular
concrete)
R
Depending on the type of ALC panel, you
may not be able to attach the camera.
Consult the ALC panel manufacturer.
R
Do not use the included screws. After
consulting the manufacturer of the ALC
panel, use only commercially-available
metal screw anchors (screw ø: 4 mm)
designed for ALC panels.
R
Carefully read the instructions supplied with
the anchors. Follow instructions regarding
drill bit diameter, hole depth, etc.
R
Drill a pilot hole. Remove any debris after
drilling the pilot hole.
R
Seal the pilot hole with a
commercially-available waterproof sealant.
Other materials (mortar, tile, etc.)
R
Do not use the included screws.
R
Consult the builder or licenced professional
regarding the type of anchor appropriate for
the installation location and materials.
R
Do not install on gypsum board or concrete
blocks.
Installing the camera
1
Attach the safety wire to the camera.
R
Place the ring of the safety wire (
A
)
over the screw hole.
R
Place a washer (
B
) on top of the ring
of the safety wire.
R
Tighten the screw (
C
) for the safety
wire on top of the washer.
1
2
3
2
Attach the camera mounting stand to an
outdoor wall.
R
Secure the stand to the wall by
tightening 4 screws (
A
).
R
1
37 mm
1
1
1
1
19
Setup
