Panasonic KX-HNB700, User Manual, Page: 27 / 96

If you cannot display camera images on Amazon Echo Show or via Google Home Chromecast, or if
images are not displayed smoothly, try using a lower bit rate setting.
1
From the [HomeHawk] app home screen, tap
®
[Settings] .
2
Tap [Access Point Settings] and select the desired access point.
3
Tap [System]
®
[Bit Rate] .
4
Select the desired setting.
Note:
R This setting is only available when Amazon Echo Show ( “Amazon Alexa features (overview)”,
Page 32) or Google Home ( “Google Home features (overview)”, Page 33) settings are enabled.
Time adjustment
You can manually or automatically adjust the time of the access point to match the mobile device.
1
From the [HomeHawk] app home screen, tap
®
[Settings] .
2
Tap [Access Point Settings] and select the desired access point.
3
Tap [System]
®
[Time Adjustment] .
4
To manually adjust the time:
Tap [Update Time] .
To automatically adjust the time:
Tap the name of the displayed mobile device, select the mobile device to match the time with, and
then tap
[OK] .
Country/region settings
You can select the country and region where you use your devices.
1
From the [HomeHawk] app home screen, tap
®
[Settings] .
2
Tap [Access Point Settings] and select the desired access point.
3
Tap [System]
®
[Country / Region] .
4
Select the desired country/region and then tap [OK] .
5
Tap [OK] .
Displaying device information
You can displayed device information, such as firmware versions and MAC addresses, and whether or
not to upload logs.
1
From the [HomeHawk] app home screen, tap
®
[Settings] .
2
Tap [Access Point Settings] and select the desired access point.
3
Tap [System]
®
[System Info] .
– [Log Upload] : Determines whether or not logs are uploaded.
Updating the firmware
You can use this feature to check for a newer version of the access point firmware (i.e., system
software). If a newer version is found, you can update the firmware.
1
From the [HomeHawk] app home screen, tap
®
[Settings] .
2
Tap [Access Point Settings] and select the desired access point.
3
Tap [System]
®
[Firmware Update] .
R The access point will connect to the Internet and check for a newer version of its firmware.
4
Follow the on-screen instructions.
27
Using the app