Panasonic KX-HNA101, User Manual

Page: 81 / 120

2
Tap [Telephone Settings] .
3
Tap [Hub PIN] .
4
Enter the current PIN and then tap [OK] .
R The default PIN is “0000”.
5
Enter the desired PIN and then tap [OK] .
6
Enter the desired PIN again and then tap [OK] .
Model information
*1 This feature is available for the following hub model numbers.
– KX-HNB600AZ
– KX-HNB600E
– KX-HNB600FR
– KX-HNB600G
– KX-HNB600HM
– KX-HNB600SA
– KX-HNB600TW
Landline settings
Important:
R Typically these settings do not need to be changed. If they are set improperly, the hub may not be able
to make and receive calls properly.
1
From the [Home Network] app home screen, tap [Settings] .
2
Tap [Telephone Settings] .
3
Tap [Landline Setup] .
4
Change the settings as desired.
–
[Dial Mode] setting (certain models only)
*1
Select [Tone] if your landline phone service supports “tone” dialing; select [Pulse] if your landline
phone service supports “pulse” or “rotary” dialing.
– [Flash Time] setting
*2
Determines how the hub’s flash/recall feature functions.
The appropriate flash time setting varies depending on your landline phone service. If the hub’s
flash/recall feature does not function properly, contact your landline phone service provider.
– [Line Mode] setting (certain models only) *3
This setting automatically maintains receiver volume at the proper level depending on the current
telephone line condition. Set the line mode to “
[A] ” if telephone line condition is not good.
Model information
*1 [Dial Mode] is available for the following hub model numbers.
– KX-HNB600
– KX-HNB600C
– KX-HNB600FR
– KX-HNB600HM
– KX-HNB600LC
– KX-HNB600ME
– KX-HNB600SA
– KX-HNB600TW
*2 The default [Flash Time] setting varies by the hub’s model number.
81
Using the app